3
TURNS THE SCALE ON AND ZERO.
TARE KEY.
POWER OFF.
SET/FIG. KEY. SET PARAMETER AND INPUT FIG.
2.2
CHARACTER PROMPT
DC X.XX: MEAN THE VOLTAGE OF BATTERY IS X.XX V.
------: SHOW THIS AS THE WEIGHT OVER 100%FS+9E, WITH THE DING SOUNDING, THIS
MEANS OVER LOAD, REDUCE THE WEIGHT.
P-OFF
：
LOW VOLTAGE, AUTO POWER OFF
Err-0
：
OVERLOAD ZERO. PLEASE TURN ON AND REDUCE TARE WEIGHT.
Err01
：
ADJUST SWITCH IS OFF WHEN CALIBRATING
Err02
：
COUNTING SAMPLE WEIGHT IS TOO SMALL
Err03
：
ONE POINT CALIBRATE, WEIGHT IS TOO SMALL
Err08
：
CHIP ERROR
C _END: RECHARGE IS END.
3
OPERATION GUIDE
3.1
ADJUST THE BASE FOOT, WATCH THE LEVEL, MAKE THE SCALE IN HORIZONTAL.
3.2TURN ON OR TURN OFF
3.2.1TURN ON
PRESS THE [ON/ZERO] KEY, THE DING SOUND, IT DISPLAYS VERSION
NO. AND THE BATTERY VOLTAGE LEVEL AND 9,8,7···1,0, THE
“ZERO” LAMP
LIGHTING. NOW THE SCALE IS IN A WORKING STATE.
ON/
ZERO
TARE
OFF
SET
0~9
