background image

  

 

  

Dear Customer,

We tried to achieve two targets when developing this product.

The first was to produce the best quality heater on the market. 

The second was to produce the most cost-effective heater. We 

feel that we have achieved these two objectives however we 

would be delighted to hear from you if you have any comments.

Thank you for purchasing one of the products in our range. We 

wish you many enjoyable warm hours.

Yours Sincerely

Chairman

The 13kW patio heater is made by Universal Innovations to an 

exacting quality standard and is covered by the following guarantee:

THIS PRODUCT IS FULLY GUARANTEED FOR 2 YEARS,

REGARDING PROPER USE.

This guarantee does not affect your statutory rights in any way.

HELPLINE Dublin Ireland

00 353 1 2873797

IF YOU NEED ANY ASSISTANCE PLEASE DO NOT HESITATE 

TO CONTACT US DIRECTLY AT THE FACTORY. DO NOT BRING 

GOODS BACK TO PLACE OF PURCHASE.

13kW Heat Focus Patio Heater

Assembly & User Instructions

New & Improved 

2 Burner Gas Barbecue 

13kw Patio Heater

For more information, contact Universal Innovations

w: www

.uig.biz  p: 

(00 353) (1) 2873797  e: 

info@uig.biz

This appliance is designed for external use only using Pr

opane (G31) gas at a supply 

pressur

e of 37 millibar and must be serviced by a competent person in accor

dance 

with the instructions included. Please read all accompanying documentation car

efully.

Technical Specifications:

Overall Height: 

 

 

2.13 meters approximately

.

Gas Category: 

 

 

I3+

Overall Width: 

 

 

865 millimetres appr

oximately.

Heat input(·Qn):

  

 

13 KW Net. ( 44356 BTU/H )

Control V

alve: 

 

 

Combined gas valve and flame failure device.

Setting Pressur

e: 

 

37mbar

Main Burner T

ype: 

 

Pressed steel venturi.

Injector Size: 

  1.82 

mm  

Regulator Outlet Pressur

e

+ Type:

  

 

 

37mbar (27mm clip on)

Servicing Procedur

e:

Servicing to be carried out by qualified gas technician, every 100 hours of use.

• Remove regulator fr

om cylinder.

• Remove reflector “Parasol” Assembly

.

• Remove “Burner” for examination and cleaning.

• Vigor

ously wire brush mesh inside and out to r

emove any clogging deposits.

• Remove windshield guard to expose main bur

ner assembly.

• Examine, clean or replace main injector

, ignition electrode, thermocouple and gas 

   pipe O ring as requir

ed. During storage, particularly, insects or for

eign matter may 

   get into gas line/nozzle. Ensure that the gas line is completely clear befor

e use.

Note: Ther

e are a number of ways to check the gas for leaks. W

e recommend a leak 

detector spray or soapy water applied onto the joints with a small paint brush be used. 

Leaks can be seen as small bubbles at the outlet point. DO NOT check for leaks using 

a naked flame. Check the condition of the hose monthly and each time the cylinder 

is changed. If the hose is in any way degraded, replace it immediately with the same 

specification of hose. Hose length must be 150cm.

The product is fully guaranteed for 2 years r

egarding pr

oper use.

For servicing contact your local gas supplier or phone

Calor Direct U.K. 0800 662 663. Universal Innovations Helpline 00 353 1 

2873797

For further information on the heater and its parts, please contact the factory dir

ect.

Helpline Hours, 9am - 5pm Mondays to Fridays. 00 353 1 2873797.

We ar

e located at: Universal Innovations.

Kilcoole Industrial Estate, Kilcoole, Co. Wicklow, Ir

eland.

GUARANTEE

OTHER PRODUCTS IN OUR RANGE

TECHNICAL & SERVICING INFORMA

TION

0086

Reviews: