background image

Page 18

Warnings

This product is for OUTDOOR USE ONLY.

• Important – Ensure the barbecue is positioned on flat level ground to aid with fat/grease run off.

• Important – LEAK TEST THE BARBECUE WHEN FULLY ASSEMBLED BEFORE FIRST USE. In

   addition, always leak test the unit – annually, when dismantled, when parts are replaced, of if the gas

   cylinder is removed or replaced. FAILURE TO DO THIS COULD CAUSE SERIOUS INJURY, OR

   DAMAGE TO THE BARBECUE.

• NEVER use indoors, in an enclosed area or below ground level.

• This barbecue is intended for use with LPG bottled gas only. (A regulator of 28mbar must be used for

   Butane gas or 37mbar for Propane gas.)

• This appliance has been supplied with a PROPANE REGULATOR (only use with Propane gas.)

• NEVER use an adjustable regulator with this barbecue.

• Failure to read and follow these instructions could result in serious injury or damage to property.

• This product will become hot when in use – take care when touching.

• Keep children and pets at a safe distance from the unit when in use.

• DO NOT move this product when in use.

• Always turn off gas supply at the gas cylinder when not in use.

• Any modification of this barbecue may be dangerous.

• DO NOT leave this product unattended when in use.

• Any parts sealed by the manufacturer or his agent must not be altered by the user.

• ALWAYS position the gas cylinder underneath the main body and ensure the cylinder is

  vertical at all times.

• When igniting, always have the lid open.

• ONLY use barbecue on a flat LEVEL non-flammable surface or ground.

• When positioning, ensure the unit is a minimum of 1 metre from flammable items or structure.

• This barbecue is not intended for use with charcoal or other similar fuel.

• Always leak test the unit – annually, when dismantled, when parts are replaced, or if the gas cylinder is

  removed or replaced.

• DO NOT use petrol, white spirit, lighter fluid, alcohol or other similar chemicals to ignite the barbecue.

• When storing the barbecue or gas cylinder, ensure they are away from flammable materials or liquids.

• The gas cylinder must not be stored next to this or any other appliance.

• Always follow care and maintenance instructions – regularly maintain your barbecue.

• DO NOT allow grease, fat or food residue to build up in or on the barbecue – RISK OF FIRE.

• Always replace worn parts – do not use barbecue if a leak, wear, or damage is found.

• Never overload the grill with food – evenly space over the cooking grill surface, ensuring sufficient air

  circulation to the burners.

• DO NOT store or cover the barbecue until fully cooled.

• This product is not suitable for Lava Rock.

• Accessible parts may be very hot. Keep young children away.

• A cooking vessel with a diameter no less than 10cm and no greater than 26cm should only be used.

• Ensure BBQ has cooled for 1 hour before removing the grease tray.

 

DO NOT

 leave your BBQ uncovered when not in use. Store your appliance in a shed or garage when not in

use to protect against the effects of extreme weather conditions, particularly if you live near coastal areas.

Prolonged exposure to sunlight, standing water, sea-air/saltwater can all cause damage to your appliance. 

(A cover may not be sufficient to protect your appliance in some of these situations)

Summary of Contents for S375





















Reviews: