Important safety instructions
1
Important Safety Instructions
Save these instructions
This manual contains important safety instructions. Read all safety and operating
instructions before operating the uninterruptible power systems (UPS). Adhere to all
warnings on the unit and in this manual. Follow all operating and user instructions. This
equipment can be operated by individuals without previous training.
This product designed for commercial/industrial use only. It is intended for use with lift
support and other designated “critical” devices. Maximum load must not exceed that shown
on the UPS rating label. The UPS is designed for data processing equipment. If uncertain,
consult your dealer or local representative.
This UPS is designed for use on a properly grounded (earthed), 220/230/240Vac, 50 or
60Hz supply. The factory default setting is 220Vac /50Hz. Installation instructions and
warning notices are in this manual.
The UPS 06 –10 kVA@220/230/240Vac is designed for use with a three-wire input
(L,N,G)(1/1) or a five-wire input (L1,L2,L3,N,G)
（
3/1
）
.
WARNING
The battery can present a risk of electrical shock and high short circuit current.
Following precautions should be observed before replacing the battery.
Wear rubber gloves and boots.
Remove rings, watches and other metal objects.
Use tools with insulated handles.
Do not lay tools or other metal objects on the batteries.
If the battery is damaged in any way or shows signs of leakage, contact your local
representative immediately.
Do not dispose of batteries in a fire. The batteries may explode.
Handle, transport and recycle batteries in accordance with local representative.
WARNING
Although the UPS has been designed and manufactured to ensure personal safety,
improper use can result in electrical shock or fire. To ensure safety, observe the
following precautions:
Turn off and unplug the UPS before cleaning it.
Clean the UPS with a dry cloth. Do not use liquid or aerosol cleaners.
Never block or insert any objects into the ventilation holes or other openings of the UPS.
Do not place the UPS power cord where it might be damaged
