9
Copyright. Sygnal 2018
8. Use or to alter the start time to the correct value (in 10 minute intervals).
9. Press
SET
to proceed to the stop time. The top line will scroll:
Program stop: ALL zones
10. Use or to alter the stop time then press
SET
to complete setting the global timer program
and return to normal operation.
2.12 Setting Individual Zone Timer Programs
1. Press
ZONE
or or to select the required zone.
2. Press
CLOCK
to display the current program days for that zone.
3. Press or to select
Program A
or
Program B
then press
SET
.
4. The top line will scroll
Program Days:Zone x.
5. A CAPITAL letter indicates that the zone on/off times will apply to that zone on that day. Press
to activate, or to deactivate each day, then press
SET
to move to the next day. Repeat for each day.
6. Press
SET
after the final day value to enter the start time. If no days have been activated the
configuration routine will exit at this point. If there are valid days the top line will scroll
Program
start: Zone x
.
7. Use or to alter the start time to the correct value (in 10 minute intervals).
8. Press
SET
to save the start time and proceed to the stop time. The top line will scroll
Program
stop: Zone x
9. Use or to alter the stop time. The top line will scroll
Program stop: Zone x.
10. Repeat for each zone as required.
2.13 Holiday, Away, Disable Time Clock Programs
1. Select the Global screen.
2. Press
CLOCK
to display the current time.
3. Press to access
TC Enable
menu.
4. Use or to select
Yes?
Or
No?
and press
SET
.
5.
TC Off
will scroll with the system information when
No?
is selected.
Stop: AL
05:30 pm
Ram Days
sMTWTFs
10:12
pm
Tu
Off
