Saia-Burgess Controls AG
Manual PCD7.D412DTPF & PCD7.D4xxxT5F │ Document 27-620 – Release ENG07 │ 2019-06-20
5-5
Structure and description of the Setup menu
Web Connection
5
5.3
Web Connection
This is where you can set the data for the device from which the website is to be
loaded and displayed. On programmable pWeb panels, this is usually the internal
controller, and so the Local Host IP Address 127.0.0.1 must be set.
5.3.1 Connection
Name of the connection.
5.3.2
Type (no selection for pWeb)
Local
Only for SVGA MB panel
No connection with any PCD
Connection is made with the local IP address 127.0.0.1
HTTP Direct
Direct connection (Ethernet, only)
5.3.3
Start page
Name of the start page for this connection.
5.3.4
Remote Host IP
IP address of the connected PCD.
5.3.5
Remote Port
Remote port (default: 80).
5.3.6
Connection List
We advise you to establish one or more connections (up to x16) from the “List of
Connections”. Edit the connection or connections and select the connection which
you would like to use for your project. Each connection can be edited at any time.
The names for the connections are required as the URL jump target in the Web
Editor:
Examples: the connection in the list is called conn2_http, and the start page of the
project Start.html
