Saia-Burgess Controls AG
Manual PCD7.D412DTPF & PCD7.D4xxxT5F │ Document 27-620 – Release ENG07 │ 2019-06-20
7-11
Updating and special settings
Internal special functions
7
Config
file
entry
Container
(source HN 10.03.10)
Type
Default
Min
value
Min length
Max
value
Max
length
Description
No
uBT_BackLightOn
Boolean value string
1
0
1
Direct operation of the backlight by making an entry in this container (1: On, 0 : Off). Status of the backlight is set to read back. Container is set by activat
-
ing the backlight by touching the screen and reset after switch off with uBT_BackLightT
imeout.
Areas of application: remote monitoring and remote control via PPO <-> Container coupling, local user control right on the terminal via the painter for buttons (mouse button pressed, mouse button released) and locally via the painter for edit fields in the web project.
R/W
uBT_BackLight
-
Timeout
Decimal value string
15
0
5000
Time (min) until backlight switches off. When the screen is touched or switched on by the container
, the backlight is switched on and the count
-
down begins.
If value=0: no time-delayed monitoring of the backlight. In this case, the backlight remains permanently switched on.
Read only
uBT_BooterV
ersion
ANSI text string
Current version string
0
8
Firmware booter version
String read, only
R/W
uBT_BuzzFreq
ANSI text string
1000
125
8000
Frequency settings of the acoustic signal from touching (125,250,500,100 0,2000,4000,8000) If using the touch function to define the pitch of the acoustic signal when touching the screen.
R/W
uBT_BuzzOnOff
Boolean value string
1 (On)
0
1
Acoustic signal from touching On (1)/Off (0)
R/W
uBT_BuzzV
ol
Decimal list string
1
0
20: 100%
Read/write volume of the buzzer (0 - 20). When using the touch function, this defines the volume of the acoustic signal when touching the screen. Using pulse width modulation, this set
-
ting changes the perceived pitch of the alarm. Switch off by setting the
volume to 0.
Read only
uBT_ConfigT
ype
ANSI text string
Curr
. config.
type
0
24
Configuration type String read, only
R/W
uBT_DefaultGateway
String IP
address
0x00 00 00 00
*
*
Read/write IP
address of the gateway on the subnet being used (forced
position, overwrites default). * Setting is 0: forced position deactivated. If the setting=0: depending upon the router you are using, it may not be possible to reach external addresses outside of the subnet. If this setting is changes, a restart is necessary
. This will mean FTP
connections are
lost.
No
uBT_DispResolution
ANSI text string
<Screen width> <Screen height> <Color depth>
0
16
Info on resolution String read, only
