01/27/2015
Sailfish 275 DC Owner’s Manual | sailfishboats.com
20
Livewell Operation
Instructions
•
Make sure the seacock below the baitwell pump is
in the open position (seacock is accessed through
the hatch under the transom walk thru door).
•
Turn on the livewell switch.
•
Adjust the black aerator in the livewell to the desired
flow (if your model has a livewell in the leaning post
you can adjust the aerator to pump water into the
transom livewell or the leaning post livewell or both)
•
In order to fill the livewell, reach in the access hatch
below the livewell and close the red handle ball
valve.
•
The livewell will fill up until it reaches the Overflow
built into the side of the livewell. This allows the
water to continually pump in and drain out while
maintaining the water level.
•
To drain the livewell open the red handle ball valve.
CLOSED
