CONTROLS
16
SCAN
PROG
SCAN
TIME
SCAN
DELETE
SCAN
SCAN
ADD
SELCALL
RESET
D.W.
Selects scanning programme.
Adds a channel to the scanning table.
Deletes a channel from the scanning table.
Stores the current scanning programme in the memory.
Selects the scan time from 1 to 99 seconds. The time chosen
will be used to listen on one of the secondary channels
receiving a signal.
Selects the dual watch facility.
Resets the selcall decoder after a call.
Tests the selcall decoder.
Selects 1W reduced power output.
Selects the VHF channels used in the USA.
Switches the panel illumination on or off.
Turns the set on or off
Increases volume progressively in 16 steps.
Reduces volume progressively in 16 steps.
Increases squelch sensitivity progressively in 8 steps,
a gradual exclusion of weak signals with atmospherics.
Reduces squelch sensitivity progressively in 8 steps
Stops and starts scanning sequence. Listen out on
several predetermined channels,
Quick select of the call and distress channel 16
Digits from 1 to 0.
Selects private channels.
Terminates the keying in of selected channels,
scanning programmes, scan time ect.
Activates the functions marked in orange
on the keyboard.
ENT
ON
OFF
SELCALL
TEST
USA
1W
DIM
P
1
SHIFT
STOP
RUN
VOL
VOL
SQ
SQ
