25
Detail
5
Errors and warnings
Errors and warnings are shown in the display accompanied by the sounds shown in the
figure below:
1 sec.
8 sec.
W
ARNING
& INFO
T
ONE
SI
GN
A
L
ERRORS
39718
In case of an error or warning message it is always possible to mute the alarm sound.
Press
in order to finish the current radiotelephony call. This procedure will not affect
the actual read-out and accept procedure for errors and warnings.
Error and warning messages are shown in the information display. Examples of a warning
can be a reminder to enter position manually each 4 hours, or that the GPS signal suddenly
is missing.
5.1
System event logging
Errors received as pop-up and information windows shall be logged in the event logging
system for later read out. The error logs are accessed from menu (4.6.3.1).
From menu 4.6.3.2 at least the following statistics are available:
•
On time (<xxxx>d <yy>h <zz>m)
•
Number of power failures
•
Number of missing GPS situations
•
Number of Tx activations
•
Number of transmitted DSC calls
The information is read only on the front panel. Counters can be reset only from the service
interface
5.2
Troubleshooting
If you doubt that your VHF system works properly, it is of great importance that you find the
reason and assure that the equipment is properly serviced if any of the devices are failing.
You should contact your authorized dealer for tecnical support of your equipment. But, before
you do that you can go through a list of actions to fix the problem by yourself and save time.
0605
Summary of Contents for RT5022 VHF DSC
