19
In normal mode, press and hold the
ALARM
key for three seconds to toggle the beeper on
or off (depending on the current setting).
The
BZ ON
(beeper on) or
BZ OFF
(beeper off) icon will appear in the time area for three
seconds. Press and hold the
ALARM
key again for three seconds to toggle the
BZ ON
or
BZ OFF
command.
9.WiFi Connection Status
When the console successfully connects to your Wi-Fi router, the Wi-Fi signal icon
will appear on the LCD display(In front of the Indoor Temperature). If the Wi-Fi signal is
not stable or the console is trying to connect to the router, the icon will flash. If the icon
disappears, it means the console is not connected to the Wi-Fi router.
Note: If you own a dual band router (2.4 GHz and 5.0 GHz),make sure you
connect to the 2.4 GHz band, otherwise it will fail to connect the weather station to
WiFi.
10. Time Server Sync Status
After the console has connected to the internet, it will attempt to connect to the internet
time server to obtain the time. Once the connection succeeds and the console’s time has
updated, the SYNC icon
will appear on the LCD. The time will automatically
synchronize to the internet per an hour.
Note: Time synchronize method: Synchronized through internet UTC time server.
11.
Register with WeatherCloud.net
Note: This is best done on a computer desktop or laptop.
Visit :
and enter a Username, Email and Password
(It is your Login
password of the website, It not your email password. So no privacy will be exposed)
.
11.1 Sign Up
1) Click Sign up as below
Figure 17
2) As shown below
,
enter a Username, Email and Password then Click Sign up.
