30
transceiver will automatically contact the “Slave” transceivers by transmitting in a
preset regular time interval (set via software). If the “Slave” transceivers receive
the signal, they are still within the communication range. If the “Slave”
transceivers do not receive the signal within the preset time limit (“AUC TOT”),
they are out of the communication range, and the beep alarm tone (“AUC Alarm”)
will sound to indicate this. In this case, “Slave” users are advised to return back to
the effective communication range.
To activate the AUC feature, do the following step:
Press
[MENU]
key, then press
[MENU]
again to enter into first-layer menu. Press
key to select group “ADDITION”, press
[MENU]
to confirm and enter
into second-layer menu. Press
key to select item “AUC”, press
[MENU]
to enter. Press
key to select ON/OFF. Press
[MENU]
to confirm and
exit.
Automatic contact position setting (AUC POS)
One of the transceivers can be set as “Mater”, and the other transceivers be set
as “Slave”
Press
[MENU]
key, then press
[MENU]
again to enter into first-layer menu. Press
key to select group “ADDITION”, press
[MENU]
to confirm and enter
into second-layer menu. Press
key to select item “AUC POS”, press
[MENU]
to enter. Press
key to select “MASTER/SLAVE”. Press
[MENU]
to confirm and exit.
Automatic contact transmitting time interval (AUC TxPer)
This feature is only for the “MASTER” transceiver. It is to set the time interval for
the Mater transceiver to transmit and to contact with “Slave” transceivers.
The available time intervals are: 5-250 seconds.
Press
[MENU]
key, then press
[MENU]
again to enter into first-layer menu. Press
key to select group “ADDITION”, press
[MENU]
to confirm and enter
into second-layer menu. Press
key to select item “AUC TxPer”, press
[MENU]
to enter. Press
key to select the desired time interval. Press
[MENU]
to confirm and exit.
Automatic contact time limit (AUC TOT)
This feature is used for “Slave” transceivers. A time limit can be set for AUC
feature. If the “Slave” transceivers do not receive the signal within the preset
time limit (“AUC TOT”), they are out of the communication range. A continuous
beep alarm tone (“AUC Alarm”) will sound to indicate this. In this case, “Slave”
users are advised to return back to the effective communication range.
The available AUC TOT values are: 5-250 seconds.
Press
[MENU]
key, then press
[MENU]
again to enter into first-layer menu. Press
key to select group “ADDITION”, press
[MENU]
to confirm and enter
into second-layer menu. Press
key to select item “AUC TOT”, press
[MENU]
to enter. Press
key to select the desired time limit. Press
Summary of Contents for RST599
Page 15: ...10 23 59 Time display Current frequency display Channel number...
Page 16: ...11 Radio illustration...
Page 41: ...36 QT DQT sheet...
