SAINT ALGUE Demeliss ONE, Manual

4

must be replaced by the manu-

facturer, its service agent or simi-

larly qualified persons in order to 

avoid a hazard.
Burn hazard. Keep appliance out 

of reach from young children, 

particularly during use and cool 

down.
When the appliance is connected 

to the power supply, never leave 

it unattended.
Always place the appliance with 

the stand, if any, on a heat-resis-

tant, stable flat surface.

BEFORE USING THE DEVICE

INSTRUCTIONS FOR USE

- Remove all packaging.

- Clean the device using a slightly damp cloth. Dry the device.

- Fully uncoil the power cable.

- Before using the device, make sure your hair is clean and tangle-

free.
- Plug-in the device.
- To turn the device on, press the ON/OFF button for 3 seconds. A 

long beep sound will indicate the device is ON. 
- Once the device is ON, the plates temperature will instantly start 

increasing until reaching the 200°C temperature.
- During heating-up phase, the LED indicator around the ON/

OFF button will start flashing. Once the maximum temperature is 

reached, two beep sounds will indicate that the device is ready for 

use, and the LED indicator will stop flashing and stay on. 
The approximate heating time is between 9 seconds and 11 seconds. 
- Once straightening is over, to turn the device off press the ON/

OFF button for 3 seconds, then unplug it. Leave it for few minutes 

for cooling.
-The device has a safety automatic shut-off function. The device will 

automatically turn off after one hour.

CLEANING

Switch-off and unplug the device, then allow it to cool. 

Remove any hair that may have been left on the device.

Clean the device using a slightly damp cloth and then dry it. 

WARNING! Do not immerse the device and/or its power cable in 

liquid: risk of short-circuit or electric shocks.