VERS.2021.09.28 CS451_MAN_EN
17
4 TRANSPORT AND STORING
Take the following measures in order to transport and store the CS 451 securely.
4.1 Securing for transport
Before transporting the machine:
Remove the blade.
Empty the water tank.
Lower the handle in its fixing tube and secure it using the locking screws.
Raise the guide-a-cut in its upright position.
Raise the cutting head to its highest position using the hand wheel, in order to activate the parking
brake.
4.2 Transport and lifting procedure
The machine can be moved on a flat surface using its wheels. Use the metal hook located over the
water tank to lift the machine with a crane
. Utilization of other part of the machine (e.g. handles)
is absolutely prohibited.
4.3 Long period of inactivity
If the machine is not going to be used for a long period, please take the following measures:
Completely clean the machine.
Loosen the drive belt.
Grease the threaded shaft.
Possibly change the motor oil.
Empty the water system.
Activate the parking brake by raising the cutting head.
The storage site must be clean, dry and at a constant temperature.