VERS.2021.09.28 CS451_MAN_EN
9
2 GENERAL DESCRIPTION OF THE CS 451
Any modification, which could lead to a change in the original characteristics of the machine, may be
done only by Saint-Gobain Abrasives S.A. who shall confirm that the machine is still in conformity with
the safety regulations. Saint-Gobain Abrasives S.A. keeps the right of making technical or design
modification without prior notification.
2.1 Short description
The
Floor Saw CS 451
you have chosen is used for small repair works in concrete and asphalt, for
cutting induction loops and installing cables as well as for cutting expansion joints. It can be used
either for wet or dry cutting operations.
An optimized mass repartition and positioning of 25 litre water tank allow outstanding cutting
performance as well as easy handling.
Operator can use specific devices to set cutting depth and track easily.
Ergonomic handles height can be set at right value whatever the cutting depth; handles feature a
built-in vibration absorbing device.
Reinforced frame reduces vibration level as well as operator’s fatigue.
CS 451
has taper lock pulleys and Poly-V belt for better reliability and easy maintenance.
Being of small construction, it can be transported in a car or van; the handle can be removed, reversed
or retracted. The 25 litre water container is also removable.
All component parts on the
CS 451
are assembled to a high quality standard, ensuring long life,
reliability and a minimum of maintenance.
Special types of blades are available for asphalt, green concrete, cured concrete (reinforced or not)
as well as for industrial cement flooring.
