VERS.2023.03.09
CDM 354_MAN_EN
8
Wear appropriate work clothes
Do not wear loose jewelry or clothing. They may get caught in moving parts. For outdoor
work, rubber gloves and shoes with profiled soles are recommended. If you have long hair,
wear a net.
Use means of personal protection
Use hard hat for protection against falling elements, gloves for protection against sharp
elements, safety glasses for protection against stone chips and/or sparks. Wear a dust mask
when performing dusty work. Wearing noise canceling headphones is recommended if the
sound level is above 80 dB(A). Wearing such a helmet is compulsory above 90 dB(A).
Use appropriate equipment and do not overload it
Only use the machine for the purpose for which it was designed. Only use tools with the
diameter that is recommended for the different speeds.
Prevent unexpected machine start-up
Remove the plug from the socket (eg during maintenance and replacement of parts). Before
connecting the machine to the electrical network, check that the switch is in the off position.
Maintain tools carefully
To work better and more safely, keep tools clean. Observe the care instructions. Keep the
handles dry and free of grease and oil.
Check the good condition of the machine
Check that the moving parts are working correctly: that they are not jamming, that no part is
broken, that they are correctly fitted, that all the conditions that could influence the correct
operation of the machine are met. Any damaged part should be replaced or repaired by a
licensed professional.
Use of accessories and auxiliary devices
Only use accessories or auxiliary devices mentioned in the manual or in the catalogue. The
use of accessories or auxiliary devices other than those mentioned may lead to a risk of
injury.
Extension cord / cord
Use only an extension cord in perfect condition, suitable for outdoor use and having a core of
a large enough diameter. Fully unwind the reel. Do not carry the machine by the cord and do
not pull the cord to remove the plug from the socket. Protect the cable against heat, oil and
contact with sharp edges.
Repair of power tools
Power tools must comply with the prescribed safety instructions. Repairs must therefore only
be carried out by an approved professional electrician, under risk of accident for the user.
Keep the work area tidy
Any mess in the work area can lead to accidents. Prohibit access to the devices and the
work area to unauthorized persons (children) and animals. When drilling, be sure to receive
the cut piece (especially when drilling into the floor or ceiling). After use, store the machine in
a safe, dry and closed place, out of the reach of children.
Consider environmental influences
