15
4
Transport and Storing
Take the following measures in order to transport and store the CSB1 D13 securely.
4.1 Securing for transport
Before transporting the machine:
Remove the blade.
Empty the water tank.
Raise the guide-a-cut in its upright position.
Raise the cutting frame to its highest position.
Take the key off the starter.
4.2 Transport procedure
The machine can be moved on a flat surface using its wheels. Rotate the handwheel on the side of
the machine clockwise to move the machine forward, and anticlockwise to move the machine
backward.
Use the metal lifting eye, located above the engine when lifting the CSB1 with a crane. This lifting
eye must not be used to lift the saw if the blade is stuck in the cut.
4.3 Long period of inactivity
If the machine is not going to be used for a long period, please take the following measures:
Completely clean the machine.
Loosen the drive belts.
Change the motor oil.
Empty the water system.
The storage site must be clean, dry and at a constant temperature.
