18
otherwise you will damage this device.
If you have an oil link on the hydraulic raise system (hydraulic machines only), eliminate the problem
(for example by changing the joints), and refill with the recommended oil.
Cleaning of the machine
Your machine will last longer if you clean it thoroughly after each day of work.
6.2 Maintenance of the engine
Regular service period
Perform operating hour interval
Ea
c
h
u
s
e
Fi
rs
t m
o
n
th
o
r 2
5
h
o
u
rs
Ev
e
ry
2
5
0
h
o
u
rs
Ev
e
ry
5
0
0
h
o
u
rs
Engine oil
Check level
Change
Cooling air zone
Check-Clean
Air intake point
Check-Clean
Water trap
Check
Air cleaner filter
Clean
Change the cartridge
Valve clearance
Check and adjust
Fuel filter
Replace
Oil level check
When checking the oil level, the engine must
not be running, and should stand horizontal.
Remove any dirt in the dipstick area.
Check oil level at the dipstick: top up if
necessary as far as the max. mark.
Changing engine oil
The engine must be stopped, and should stand horizontal. Drain the engine oil when its warm.
CAUTION!
Risk of scalding from hot oil.
Please dispose of used motor oil in a manner that is compatible with the environment. We
suggest you to take used oil in a sealed container to your local recycling centre or service
station for reclamation. Do not throw it in the trash, pour it on the ground or down in a drain.
