VERS. 04.12.2019
MAN CWM 216/254 EN
20
3
OPERATING THE MACHINE
3.1 Installation
3.1.1 Information concerning the working site
Remove from the site anything, which might hinder the working procedure.
Make sure the site is sufficiently well lit.
Observe manufacturer's conditions for connecting to power supplies.
Place electric cables in such a way that damage is excluded.
Make sure you have a continual adequate view of the working area so you can intervene in the working
process at any time.
Keep other staff out of the area, so you can work safely.
Set the machine on the flat and stable ground.
3.1.2 Space required for operation and maintenance
In order to use and maintain the machine safely and correctly, leave 2 m in front and 1, 5 m around of the
machine.
.
3.2 Maintenance
Your power tool requires no additional lubrication or maintenance.
There are no user serviceable parts in your power tool.
Before and after each use, check the product and accessories (or attachments) for wear and damage. If
required, exchange them for new ones as described in this instruction manual. Observe the technical
requirements.
If the replacement of the supply cord is necessary, this has to be done by the
manufacturer or his agent in order to avoid a safety hazard.
