38
Housing protection class
The housing has IP65 protection. The housing is dustproof and protected against
water jets from any angle. However, the clamps are exposed, so the charger must
only be used indoors in dry, closed rooms.
11 | Troubleshooting
Troubleshooting
If the charger does not work, start by carrying out the following checks:
• Is the power outlet (wall socket) working properly and is it supplying mains
voltage? (check the power outlet)
• Is the connected battery faulty or deeply discharged?
• Is the charger connected to the correct battery terminals?
The
symbol lights up if the polarity is reversed.
The housing of the charger may heat up if the charger is used for a
long period with a charging current of 4 A (e.g. for larger batteries).
This is not a device fault, but a normal technical feature.
12 | Cleaning
Use a soft cloth and a little mild cleaning agent to clean the housing. Harsh
solvents such as thinner or petrol must not be used, nor must scouring agents, as
these will damage the surface.
Dispose of cleaning wipes and excess cleaning agent in an environmentally
friendly manner. For safety reasons, the power plug must always be disconnected
from the power outlet, and the charging cable must be disconnected from the
battery before cleaning.
13 | Maintenance
You should always have maintenance and repair work carried out by an
authorised specialist or specialist workshop.
14 | Warranty
The dealer/manufacturer from whom the charger was obtained guarantees the
materials and workmanship of the charger for a period of two years from the
date of receipt. In the event of a fault, the purchaser is initially only entitled to
subsequent performance. Subsequent performance comprises either repair of
the fault or supply of a replacement product. Devices or parts which have been
Summary of Contents for 60901901
Page 41: ...41 ...
