22 / 84 EN
Dryer / User Manual
Selecting a Programme and Operating Your Machine
C
If you select a new programme by turning
the Programme Selection knob while
your machine is in Pause mode, then
the current program is aborted and new
programme information is displayed.
Do not touch the inner surface of the
drum when adding or taking out laundry
while a programme is running. Surfaces of
the drum are hot.
5.14 Canceling the programme
If you want to stop drying and cancel the programme
for any reason after the machine has started to run,
press and hold the Start / Pause / Cancel button for 3
seconds. Lint Filter Cleaning and Water Tank warning
symbols light up and “End” label appears on the display
as a reminder at the end of this period.
A
As the inside of the machine will be
excessively hot when you cancel the
programme while the machine is running,
activate the ventilation program to cool it
down.
C
Machine will stop if you turn the
Programme Selection knob while it is
operating. In this case, current programme
is aborted and the new programme
information appears on the display.
5.15 End of programme
Lint Filter Cleaning and Water Tank warning symbols
light up in the programme follow-up indicator and “End”
label appears on the display when the programme
comes to an end. The loading door can be opened and
the machine becomes ready for a second cycle.
Press On / Off button to switch off the machine.
C
If Anti-creasing function is activated and
the laundry is not taken from the machine
at the end of the programme, 2-hours
Anti-creasing programme is activated.
C
Clean the lint filter after each drying. (See
“Lint Filter / Loading Door Inner Surface”)
C
Drain the water tank after each drying
cycle. (See “Draining the water tank”)
