8000m Series
-
03
-
CAUTION
Never connect the AC power supply to output terminals U, V and
W. Otherwise the inverter will be damaged and the guarantee is
invalid.
Make sure that wiring conform to EMC requirements and local
power safe standard. Make sure to use right wire according to this
instruction manual. Otherwise it may cause an accident.
Braking resistor or braking unit cannot be directly connected to
DC bus terminals. Otherwise it may cause a fire.
Before Turn on the AC Power Supply
WARNING
Make sure that the voltage of inverter conforms to the local
power supply voltage. Verify that the wiring of input and output is
correct and there is no short-circuit in peripheral circuit. Tighten
the terminal screws. Otherwise these may cause damage to the
inverter.
Turn on the input AC power only after the front cover is put
correctly. Otherwise it may cause an electrical shock.
CAUTION
Never perform a hi-pot or withstand voltage test of the inverter.
Otherwise it may cause damage to the inverter.
Make sure that the optional parts are connected correctly.
Otherwise it may cause damage to the inverter.
