USER MANUAL
SAJ SOLAR INVERTER
20
Instruction for Installation
4.1
Safety Instruction
4.2
Pre-installation Check
4.3
The Determination of
the Installation
Method and
Position
DANGER
· Dangerous to life due to potential fire or electricity shock.
· Do not install the inverter near any inflammable or explosive items.
· This inverter will be directly connected with HIGH VOLTAGE power generation device; the
installation must be performed by qualified personnel only in compliance with national and
local standards and regulations.
NOTICE
· This equipment meets the pollution degree II.
· Inappropriate installation environment may jeopardize the life span of the inverter.
· Installation directly exposed under intensive sunlight is not recommended.
· The installation site must be well ventilated.
Although SAJ’ s inverters have thoroughly tested and are checked before
delivery, it is uncertain that the inverters may suffer damages during trans
-
portation. Please check the package for any obvious signs of damage, and
if such evidence is present, do not open the package and contact your
dealer as soon as possible.
① The equipment employs natural convection cooling, and it can be installed indoor
or outdoor.
② Vertical installation on eye level is recommended. Mount vertically or tilted back
-
wards by max. 15 ° . Never install the inverter tilted forwards, sideways, horizontally or
upside down.
③ Considering convenience for maintenance, please install the equipment at eye level.
④ When mounting the inverter, please consider the solidity of wall for inverter, includ
-
ing accessories, make sure the wall has enough strength to hold the screws and bear
the weight of products. Please ensure the mounting bracket mounted tightly.
Please refer to the packing list inside the package container.
19
4
4.3.1
Mounting methods
Fig 4.1
Mounting methods
4.2.1
Check the Package
4.2.2
Scope of Delivery
