ー 19 ー
Bolt mounting the engine
10~15mm
Adjust the belt tension carefully as an inadequate adjustment remark-
ably shortens service life of the belt.
•
IMPORTANT
Nut
7.5. V-belt
Check the V-belt tension and adjust it if necessary.
Check
①
Unscrew 2 bolts securing the cover to remove the cover.
②
Check the bolt tension of it deflects 10 mm to 15 mm by pushing it with your thumb at a
center point between both shafts. adjust the tension as necessary.
7. Inspection and Maintenance
Bolt securing the bracket
Adjustment
①
Loosen the bolt securing the bracket and 4 bolts mounting the engine to some extent.
②
Shift mounting positions of the engine backward so that belt deflects as specified above.
③
Re-tighten the bolts.
Summary of Contents for PC600
Page 2: ......
Page 28: ...O P ...