5-014
RAMMING SYSTEM
3-6. Removal of Adapter
WARNING
• The adapter is under heavy pressure. It must
be carefully removed. If the adapter is removed
incorrectly, the springs can eject with enough force
to cause serious injury or death.
• Make sure that M10×40 bolts are removed when
installing the jig. If M10×20 bolts are removed
instead of M10×40 bolts, the jig can not fix adapter
to the oil pan and the springs will pop out with
serious injury or death.
1) Turn the oil drain plug (18) of the adapter (21) so that it is
on the left side. Then remove the two M10x40 bolts (20) in
the position they are shown in the
fi
gure.
(NOTICE)
• M10x20 and M10x40 bolts are used as the adapter
mounting bolts and installed alternately .
After ensuring that the M10x40 bolts are removed,
install the jig.
• When removing the adapter for the RS45 and RS55E,
just substitute the M10×40 and M10 × 20 bolts with the
M8×35 and M8x16 bolts shown in the manual.
RS45-05012
20
20
18
21
RS45-05013
20
19
20
19
19
19
Jig
2) Place the jig securely in the holes where the bolts have
been removed.
Jig Number : 9469-47002-0 (For RS45, RS55E)
0466-47010-0 (For RS65, RS75)
(NOTICE)
• After mounting the jig, remove the remaining six M10x20
bolts (19) and M10×40 bolts (20) from the adapter.
WARNING
Screw the threaded columns of the mounting jig
through the M10x40 bolt holes and
fi
x them
fi
rmly
into corresponding bolt holes the oil pan (5).
Summary of Contents for RS45
