15
Capturing Photos
TAKING INDIVIDUAL PHOTOS
By default the camera is in Photo mode when powered on. The photo icon is
automatically selected and appears in the top left corner of the LCD.
1. Compose your shot using the View Finder or LCD screen.
2. Hold the camera steady and press the Shutter button.
3. A beep will sound and
the red LED indicator on the front of the camera will light
up, indicating that the photo has been taken.
Note: Do not move the camera until you hear the beep. Moving the camera while
taking the picture will cause the photo to blur.
4. After each photo is taken the number of photos taken appear momentarily and is
displayed at the bottom left of the LCD screen.
5. If the level of brightness is too low, two quick beeps will sound, indicating that the
photo cannot be taken.