7
Inserting Batteries
1.
Open the camera‟s battery compartment cover on the bottom of the camera.
2. Insert 2 new AAA alkaline batteries according to the polarity shown.
3.
3. Close the battery cover.
4.
5.
Warning: Removing the batteries before downloading photos and videos
from the camera will erase everything in the camera`s memory.
Note: We recommend to download and save your photos and videos often
so as not to lose them if the battery power becomes too low < 5%.
more than
70% power
35%-70%
power
5%-35%
power
less than
5% power
Camera Modes
In order to download the photos and videos captured with this camera
you need to install the Vivitar Experience Image Manager and camera
specific driver for this device. The instructions to install this software are
explained further on in this manual.
