background image

3

• 

Do not use power tools in explosive environments, such as in the presence of  

 

flammable liquids, gases or dust. 

• 

Keep children and other bystanders away from the area where you are using  

 

the power tool.

• 

Wear personal protective equipment as appropriate including safety googles  

 

and a dust mask. 

• 

Stay alert and use common sense when operating this product. Do not use  

 

under the influence of drugs, alcohol or medication.

• 

Ensure that the plug is correctly fitted to the power socket. Never modify  

 

the plug in anyway. Never use an adaptor plug together with earthed power  

 tools.

• 

Never modify this unit in anyway.

• 

Do not abuse the mains power lead e.g. by pulling, carrying or unplugging   

 

the Polisher.

• 

When using the Polisher with an extension cable, ensure that you select one  

 

which is fit for purpose.

• 

Inspect the unit before use.

• 

After use ensure that the Polisher has finished rotating before placing on a  

 

surface or changing the polishing pad.

• 

Ensure that the Polisher is turned to ‘off’ before connecting to a mains power  

 supply.

• 

Do not use if the Polisher switch does not turn on or off. 

• 

Maintain labels on the Polisher as they contain important safety information.

• 

Use the Polisher and accessories in accordance with these instructions.

• 

Regularly clean the air vents.

• 

Store in a clean, dry location.

• 

Keep out of reach of children.

• 

Do not allow people who are unfamiliar with the Polisher or these  

 

 

instructions to operate.

Saxon accepts no liability for the misuse of this product.

Summary of Contents for GP-CP06









Reviews: