4
Polishing Safety Instructions
This power tool is intended for the purpose of polishing and buffing. Read all
safety warnings, instructions, illustrations, and specifications provided. Failure to
adhere to all of the following instructions can result in electric shock, fire and/or
serious injury.
•
Polishing bonnets with drawstrings are not recommended to be used
with this product.
•
The rated speed of the accessory must at least correspond to the
maximum rated speed of the Polisher. The accessory MUST be:
•
Rated to at least 4,200 RPM
•
No larger than 6” (125 mm) in diameter
•
Fitted with a threaded opening of 5/8” x 11 TPI
•
Undamaged and with a backing pad
•
The outer diameter and thickness of the accessory must be within the marked
capacity of your Polisher.
•
Do not use a damaged accessory.
•
Ensure the mains lead is positioned well away from the rotating accessory.
•
Do not use accessories which require liquid coolants.
•
The tool will vibrate during use. Avoid using for extended periods of time.
•
Do not smoke during use.
•
Kickbacks are the result of the Polisher being used incorrectly, on incorrect
objects or with incorrect accessories or under incorrect conditions. It can be
avoided by taking proper precautions.
•
Never place your hand near a rotating accessory.
•
The warnings, precautions and instructions discussed in this instruction
manual cannot cover all possible conditions and situations which may occur.
It must be understood by the operator that common sense and caution are
factors which cannot be built into this product, but must be applied by the
operator.
