6
The Polisher has a variable speed control setting. Always start using the slowest
speed to get the best results.
The polishing pad can be changed as required. Ensure that the Polisher is turned
off at the mains before changing the pad.
The polishing sponge should be centred on the backing pad. The easiest way to do
this is by placing the polishing pad underneath the Polisher and then placing the
backing pad onto it from above. It should be placed evenly around the edge of the
backing pad.
The Polisher normally vibrates during use due to its oscillating action. If the
Polisher vibrates a great deal, check that the polishing sponge is centred on the
backing pad.
The backing pad is factory-balanced for a polishing sponge of the recommended
dimensions.
