Clean cooling pad
Disconnect the power,unscrew the 6 screws on the shutter,then pulls the shutter slightly,and
ke off the cooling pads assy.
ta
Attention:
Do not make too high water pressure
，
not use acidity or alkalinity detergent
◆
r tank
utton after power on and power off after 2 minutes
nnect power,unscrew the screws on the shutterand take off the shutter
Cle
t
which easy to create bubble and
13
Clean wate
Method:
1. Press "drain" b
2. Disco
3. Clean the bottom with soft brush
4. Clean the dirt from the water level sensor
5. Clean the water pump,drainage pump and filter with brush
an he cabinet
Clean the cabinet with soft detergent(Do not use the detergent
hard brush)
SAKUR
Total Air Conditioning Solution
A –
13 CLEAN AND MAINTENANCE
