SAL DVR 300 Instruction Manual Download

Page: 6 / 34

Cleaning

Use a soft, dry cloth for regular cleaning. Do not use aggressive cleaners! Do not allow any liquid inside the appliance and the connectors. Keep the lens

clean and do not scratch it!

Warnings

• Check the mounting option on your car before buying. • Place and fix the product securely. • The display is not a touch screen, do not press the surface.

• Recommended file system for memory: FAT32. Do not use a NTFS formatted memory unit. • Insert or remove the memory card while the device is

switched off. Otherwise, the data and / or the device may be damaged. • Abnormal operation may be caused by the unique features of the memory unit,

which does not indicate a malfunction of the unit! • Do not carry out any operations that are diverting attention from driving while driving. Handling this

unit during driving may cause an accident. • Do not install the device or its accessories in a place where it may hinder the view and the safe control of the

vehicle. For example, near the steering wheel and gearbox. • Do not let the wires run around the surrounding objects. Arrange the cables so that they do

not interfere with the driving. Obstacles to the steering wheel, gearbox, brake pedals, etc. hanging wires can be extremely dangerous. • This equipment

is not designed for professional use. Do not rely solely on these indications. Not all functions are guaranteed under all circumstances! • There is a fuse

in the car charger. If necessary, replace the original with 5x20mm / F2A after removing the cap. • Before switching on, make sure that the passenger

compartment temperature is between 0 ° C and + 40 ° C because the smooth operation is guaranteed only in this range. Extreme weather conditions can

cause damage to the device. • Protect from dust, humidity, liquids, moisture, frost and shock, as well as from direct heat and sunlight! • Do not disassemble

or transform the unit as it may cause a fire, accident or electric shock.Unauthorized installation or operation will result in the termination of warranty. • Make

sure that the use of the product is not limited by laws at the place of use. • The accumulator can’t be replaced and is considered a hazardous waste at

the end of its life. • Due to continuous improvements the design and specifications may change without any prior notice. • We don’t take responsibility for

printing errors and apologize if there’s any.

Troubleshooting

If the error is detected, turn off the device. Try to reconnect later. If the problem persists, review the following list. This guide can help you locate the problem

if it is otherwise connected to your device. Contact a specialist if necessary!

Image quality is not appropriate

• Wrong settings in the menu.

- Check the detailed menu settings such as picture resolution or white colour.

- If there is only a problem in the dark, check if the WDR is turned on. Turn it off daytime when it is needed.

No sound or incorrect volume

• Wrong settings in the menu.

- Check the detailed settings of the menu, such as enabling voice recording.

No response to button presses

• The microprocessor does not respond.

- Press the

RESET