MIN
MAX
LI
NE
N
C
OT
TO
N WOOL SIL
K
N
YL
O
N
20
Steam Ironing
The quantity of steam is regulated by the steam control (3).
Adjust the steam control (3) and the temperature control (7) to
the desired setting. Depending on the textiles to be ironed the
set position will vary between Minimum and Maximum.
If steam escapes the soleplate (9) when the iron is held
horizontally, the appliance is ready for steam ironing.
Power Steam (horizontally / vertically)
Use the power steam button (5) to smooth and remove the
most stubborn and hard to reach creases from garments.
You can only use the steam boost function at high temperatures
( •• and above).
Press the power steam button (5) in intervals (every 5 – 10 sec.)
to generate a powerful boost of steam.
To smooth hanging clothes hold the iron in an upright position
(vertical) and press the power steam button (5) in intervals.
Wait a few seconds before pressing it again.
Note:
If water drips from the soleplate (9), the temperature
setting (7) might be too low. Either increase the temperature
setting (7) or wait a few seconds before pressing the power
steam button (5) again to let the soleplate (9) heat up.
Spray Function
Use the spray function at any temperature setting to iron out
very stubborn creases by pressing the spray button (4). Make
sure that there is enough water in the water tank (8).
