TM
11-08-0000
MULTI-STATUS
ALARM TRANSMITTER
User’s Manual
Sea Air and Land Communications Ltd, 120 St Asaph Street, Christchurch, New Zealand
SALCOM 11-08 MULTI-STATUS ALARM TRANSMITTER USER'S HANDBOOK
ISSUE 1108UA 07/94
Sea Air & Land Communications Ltd.
Page 2
SALCOM 11-08
MULTI-STATUS ALARM TRANSMITTER
DESCRIPTION
The 11-08 eight input alarm transmitter operates as a one way alarm
control signalling system. It has an internal tone sequential encoder
interfaced to an on-board 160mHz FM 0.5 watt transmitter. The 11-08
is normally used with an associated Salcom SR160 receiver and a
suitable decoder such as the Sigtec P1310NTC or T2160.
The encoder is field programmable and can be tailored to many
applications where one way signalling meets the system criteria. Some
examples are:
!
Remote control of pumps and indication of pump status.
!
Water level alarming in association with pump control.
!
Security alarm and monitoring.
Features
:
The features provided in the 11-08 include:
!
Low Power consumption
- 7 milliamps (typ.)
!
Multiple Address Codes
- 4 available of 16 tones
!
Multiple Signalling Fomats
- 5 tone, 5 tone+status and 11 tone.
!
Supports 2 Tone Sets
- CCIR & EIA
!
Individual Switch debounce
- Fully field programmable
!
Two Individual Poll Timers
- Fully field programmable
!
Four Substitute tones
- Fully field programmable
!
Able to force read the current state of all input switches
!
Fully field programmable
- EEROM (thru serial adpt)
!
Random retry timer
- 0 to 6.4 seconds
!
Enable random timer on any or all switches
!
Switch Power-up mask
- Fully field programmable
!
Switch Input phase
- Fully field programmable
!
Disarm ALL inputs
- To allow maintenance
!
On board CPU Cop
- Internal CPU watchdog
!
Lead-in-Delay
- Fully field programmable
!
Retry Timer
- Fully field programmable
!
Input Designated to cancel Retry timer.
!
Twin Internal Low Battery Detector.
