EN |
55
AMBERAIR COMPACT S-CX v2023.3
9.2. THE COMPONENTS OF THE AIR HANDLING UNITS
All the individual components are specified below in a simplified and diagrammatical description.
Fig. 9.2.1 AmberAir Compact S-CX V
Fig. 9.2.2 AmberAir Compact S-CX H
1 - Plate heat exchanger; 2 - Exhaust fan; 3 - Supply fan; 4 - By-pass
damper
; 5 - Electrical/water coil;
6 - Control board; 7 - Supply air filter; 8 - Extract air filters; 9 - Pressure switch.
9.3. DISPOSAL
Old unit still have some residual value. An environmentally friendly method of disposal will ensure that valuable raw materials may be recovered
and used again.
The danger of injury from sharp edges, sharp corners and thin sheet metal parts!
Separate the components for recycling into the following categories:
• Steel
• Aluminium
• Plastics
• Insulating materials
•
Cables and wires
• Electronic scrap, e.g., circuit boards
Fig. 9.3.1 AmberAir Compact S-CX V
