background image

AVA S/AVA DX/RFC/RWC v2024.1

14 

| EN   

8.  WARRANTY

1. All equipment manufactured in our factory is checked in operating conditions and tested before delivery. The test protocol is supplied together 

with the unit. The equipment is shipped in good working condition to the end client. The unit is warrantied for the period of two years from the 

date of the invoice.

2. 

If equipment is found to have been damaged during transportation, a claim should be made against the carrier, as we assume no responsibility 

for such damage.

3. 

This warranty does not apply:

3.1. 

when transportation, storage, installation and maintenance instructions of the unit are violated;

3.2. 

when the equipment is improperly maintained, mounted - inadequate maintenance;

3.3. 

when the equipment without our knowledge and permission has been upgraded or unskilled repairs were made;

3.4. 

when the unit was used not for its original purpose.

3.5. 

Company SALDA UAB is not responsible for potential loss of property or personal injury in cases where the Air Handling unit is manufactured 

without the control system and the control system is installed by the client or the third parties. The manufacturer’s warranty does not cover 

devices that will be damaged by installing the control system.

4. 

This warranty does not apply to these malfunction cases:

4.1. 

mechanical damage;

4.2. 

damage caused by entering outside objects, materials and liquids;

4.3. 

damage caused by natural disasters, accidents (voltage change in the electricity network, lightning, etc.).

5. 

The company assumes no liability for the damage to its products neither directly nor indirectly, if the damage is caused by failure to comply with 

the installation and mounting regulations, deliberate or careless users or third-party behaviour.

These conditions are readily discernible when the equipment is returned to our factory for inspection.

If the direct client determines that equipment is found to be faulty, or a breakdown occurred, he should inform the manufacturer within fi ve working 

days and deliver the equipment to the manufacturer. Delivery costs should be covered by the customer.

The manufacturer reserves the right to change this technical passport at any time without prior notice if some typographic 

errors or inaccurate information is found, as well as after improving the apps and/or the devices. Such changes will be 

included in the new issues of the technical passport. All illustrations are just for information and thus may diff er from the 

original device. The newest manual version is available at  https://select.salda.lt

Warranty term

24 months*

I received the complete package and technical manual of the product ready for usage. I have read the warranty terms and conditions and agree 

with them:  

..........................................................................................................................................................................

Customer’s signature

*Refer to WARRANTY CONDITIONS

Dear User, we appreciate your choice and do hereby guarantee that all ventilation equipment manufactured by our Company is inspected and 

thoroughly tested. An operational and high-quality product is sold to the direct buyer and shipped from the territory of the factory. It is provided with 

a 24-month warranty from the issue date of the invoice.

Your opinion is important to us, thus we always look forward to hearing your comments, feedback, or suggestions regarding technical and 

operational characteristics of the Products.

In order to avoid any misunderstandings, please read the instructions for installation and operation of the product as well as other technical 

documents of the product carefully. The number of the Limited Warranty Coupon and the serial number of the product specifi ed on the silver 

identifi cation sticker attached to the housing must match.

The Limited Warranty Coupon shall be valid provided that the seller’s stamps and records are clear. It is not allowed to change, delete, or rewrite 

the data specifi ed on it in any manner – such a coupon shall be invalid.

With this Limited Warranty Coupon the manufacturer confi rms his obligations to implement the imperative requirements established by eff ective 

laws on protection of consumer rights in the event of identifi cation of any defects of the products.

The manufacturer reserves the right to refuse provision of free warranty servicing in cases when the warranty conditions listed below are 

disregarded.

8.1. 

LIMITED WARRANTY COUPON

1. All equipment manufactured in our factory is checked in operating conditions and tested before delivery. The test protocol is supplied together 

with the unit. The equipment is shipped in good working condition to the end client. The unit is warrantied for the period of two years from the 

date of the invoice.

2. 

If equipment is found to have been damaged during transportation, a claim should be made against the carrier, as we assume no responsibility 

for such damage.

3. 

This warranty does not apply:

3.1. 

when transportation, storage, installation and maintenance instructions of the unit are violated;

3.2. 

when the equipment is improperly maintained, mounted - inadequate maintenance;

3.3. 

when the equipment without our knowledge and permission has been upgraded or unskilled repairs were made;

3.4. 

when the unit was used not for its original purpose.

3.5. 

Company SALDA UAB is not responsible for potential loss of property or personal injury in cases where the Air Handling unit is manufactured 

without the control system and the control system is installed by the client or the third parties. The manufacturer’s warranty does not cover 

devices that will be damaged by installing the control system.

4. 

This warranty does not apply to these malfunction cases:

4.1. 

mechanical damage;

4.2. 

damage caused by entering outside objects, materials and liquids;

4.3. 

damage caused by natural disasters, accidents (voltage change in the electricity network, lightning, etc.).

5. 

The company assumes no liability for the damage to its products neither directly nor indirectly, if the damage is caused by failure to comply with 

the installation and mounting regulations, deliberate or careless users or third-party behaviour.

These conditions are readily discernible when the equipment is returned to our factory for inspection.

If the direct client determines that equipment is found to be faulty, or a breakdown occurred, he should inform the manufacturer within fi ve working 

days and deliver the equipment to the manufacturer. Delivery costs should be covered by the customer.

The manufacturer reserves the right to change this technical passport at any time without prior notice if some typographic 

errors or inaccurate information is found, as well as after improving the apps and/or the devices. Such changes will be 

included in the new issues of the technical passport. All illustrations are just for information and thus may diff er from the 

original device. The newest manual version is available at  https://select.salda.lt

Warranty term

24 months*

I received the complete package and technical manual of the product ready for usage. I have read the warranty terms and conditions and agree 

with them:  

..........................................................................................................................................................................

Customer’s signature

*Refer to WARRANTY CONDITIONS

Dear User, we appreciate your choice and do hereby guarantee that all ventilation equipment manufactured by our Company is inspected and 

thoroughly tested. An operational and high-quality product is sold to the direct buyer and shipped from the territory of the factory. It is provided with 

a 24-month warranty from the issue date of the invoice.

Your opinion is important to us, thus we always look forward to hearing your comments, feedback, or suggestions regarding technical and 

operational characteristics of the Products.

In order to avoid any misunderstandings, please read the instructions for installation and operation of the product as well as other technical 

documents of the product carefully. The number of the Limited Warranty Coupon and the serial number of the product specifi ed on the silver 

identifi cation sticker attached to the housing must match.

The Limited Warranty Coupon shall be valid provided that the seller’s stamps and records are clear. It is not allowed to change, delete, or rewrite 

the data specifi ed on it in any manner – such a coupon shall be invalid.

With this Limited Warranty Coupon the manufacturer confi rms his obligations to implement the imperative requirements established by eff ective 

laws on protection of consumer rights in the event of identifi cation of any defects of the products.

The manufacturer reserves the right to refuse provision of free warranty servicing in cases when the warranty conditions listed below are 

disregarded.

Summary of Contents for AVA S

















Reviews: