8
Smarty 3X VE / Smarty 3X VE 3.0
www.salda.lt
Fans
- phase/voltage
[50 Hz/VAC]
~1,230
exhaust
- power/current
[kW/A]
0,086 / 0,92
0,086/0,92
- speed
[min
-1
]
3200
supply
- power/current
[kW/A]
0,089 / 0,93
0,089/0,83
- speed
[min
-1
]
3200
- control input
[VDC]
0 - 10
- protection class
IP - 54
Total power consumption
- power/current
[kW/A]
0,17 / 1,85
0,18/1,77
Automatic control integrated
+
Thermal efficiency
90 %
Insulation of walls
[mm]
30
Netto weight
[kg]
57
57
Max unit’s power/current (with
all possible accessories
[kW/A]
1,47 / 7,52
0,18/1,77
• Proceed to maintenance and repair after any rotation in the fan stopped.
• Clean the heat exchanger once a year.
• Firstly take out heat exchanger cassette carefully. Submerge it into a bath and wash with warm soapy water (do not use soda). Then rinse it with
weak hot water stream (too strong stream can fold the plates). Place back the heat exchanger only when it is completely dry.
1. All equipment manufactured in our factory is pre-run and tested before leaving. Test protocol is supplied together with the unit. The equipment is
shipped in good working order and condition to the direct client. The unit is warrantied for the period of two years from the invoice date.
2. If equipment is found to have been damaged in transit, a claim should be made against carrier, as we assume no responsibility for such damage.
3. This warranty does not apply:
3.1. when transportation, storage, installation and maintenance instructions of the unit are violated;
3.2. when the equipment is improperly maintained - inadequate maintenance;
3.3. when the equipment without our knowledge and permission has been upgraded or unskilled repairs were made;
3.4. when the unit was used not for its original purpose.
4. This warranty does not apply at these malfunction cases:
4.1. mechanical damage;
4.2. damage caused by entering foreign objects, materials, liquids;
4.3. damage caused by natural disaster, accident (voltage change in the electricity network, lightning, etc..) or accident.
5. The company assumes no liability for its products either directly or indirectly damage, if the damage is caused by failure to comply with installation
and mounting regulations, deliberate or careless users or third-party behavior.
These conditions are readily discernable when the equipment is returned to our factory for inspection.
If the direct client determines that equipment is found to be faulty, or a breakdown occurred, he should inform the manufacturer within five working
days and deliver the equipment to manufacturer. Delivery costs should be covered by customer.
Smarty 3X VER, Smarty 3X VER 3.0
Smarty 3X VEL, Smarty 3X VEL 3.0
