6. Make sure that the edges of the cutting
links are turned forward on the top edge of
the guide bar.
7. Assemble the
clutch
cover and steer the
chain adjuster pin to the hole in the guide
bar.
8. Make sure that the drive links of the saw
chain fit correctly on the drive sprocket.
Also make sure that the saw chain is
correctly engaged in the groove in the
guide bar.
9. Tighten the guide bar nuts with your
fingers.
Chain-tensioning
Pin Hole
Drive
Sprocket
Chain Drive
Links
Chain
Rotation
Cutters
Clutch
10.Tighten the saw chain by turning the chain
tensioning screw clockwise with the
combination wrench
. Tighten the saw chain until it does not sag
from below the guide bar, but you can turn
Chain-tensioning Screw
3
