background image

S

ALES

M

ARK 

Note 2 

In accordance with the requirements of footnote AUS 32 and footnote 150 to the 

Table of Allocations in the Australian Radiofrequency Spectrum Plan, a low interference 
potential device will not be afforded protection from interference that may be caused by 
ISM applications in the ISM bands 13.553 MHz – 13.567 MHz, 26.957 MHz – 27.283 
MHz, 40.66 MHz – 40.70 MHz, 918 MHz – 926 MHz, 2 400 MHz – 2 500 MHz, 5 725 
MHz – 5 875 MHz and 24 000 MHz – 24 250 MHz. 
 
Sales Mark and it’s distributors offer no guarantee in the above and accept no liability of such 
interference. 
 
It can also be excluded that there will be faults occurring between participants. 
 
During operation of the system please adhere to the local valid regulations and standards for the 
protection of third parties. To avoid bodily harm, the transmitter should not be operated directly from the 
body of a person or animal or in its immediate vicinity. Please keep a distance of some several metres. 
 
For a faultless operation we recommend the installation of transmitter and 
receiver above and away from moving objects within the broadcasting range. 
 

 

5.8GHz Video Receiver showing connections. 
 

Summary of Contents for FVÜ5802FM






Reviews: