2
SALICRU
General index
1. INTRODUCTION.
1.1. ACKNOWLEDGEMENT LETTER.
2. INFORMATION FOR SAFETY.
2.1. USING THIS MANUAL.
2.1.1. Conventions and used symbols.
3. QUALITY AND STANDARD GUARANTEE.
3.1. DECLARATION OF THE MANAGEMENT.
3.2. STANDARD.
3.2.1. First and second environment.
3.2.1.1. First environment.
3.2.1.2. Second environment.
3.3. ENVIRONMENT.
4. PRESENTATION.
4.1. VIEWS.
4.1.1. Views of the equipment.
4.2. PRODUCT DEFINITION.
4.2.1. Nomenclature.
4.3. OPERATING PRINCIPLE.
4.3.1. Main features.
4.4. OPTIONS.
4.4.1. Isolation transformer.
4.4.2. External manual bypass manual.
4.4.3. Communication card.
4.4.3.1. Integration into IT networks by means of the SNMP adaptor.
4.4.3.2. RS485 Modbus.
4.4.3.3. Dry contacts.
5. INSTALLATION.
5.1. EQUIPMENT RECEPTION.
5.1.1. Reception, unpacking and contents.
5.1.2. Storage.
5.1.3. Unpacking.
5.1.4. Transport till its location.
5.1.5. Location, immobilising and considerations.
5.1.5.1. Location for single units.
5.1.5.2. Location for parallel systems.
5.1.5.3. Immobilising the equipment.
5.1.5.4. Preliminary considerations, before connecting the equipment.
5.1.5.5. Preliminary considerations for batteries and their protections
before connecting the equipment.
5.1.5.6. Connection parts.
5.2. CONNECTION.
5.2.1. Connection of the input terminals to AC power supply.
5.2.2. Connection of load/s to the output terminals or output 1.
5.2.3. Connection of the load/s to the output terminals 2 (TWIN/3
PRO2 from 8 to 20 kVA only).
5.2.4. Connection with the external battery module and extended
back up times.
5.2.5. AC power supply for the battery charger built in the battery
module.
5.2.6. Connection of the main protective earth
and bonding earth
.
5.2.7. EPO terminals (Emergency Power Off).
5.2.8. Terminals for digital Input and Output.
5.2.9. Terminals for the manual bypass auxiliary contact.
5.2.10. Parallel connection.
5.2.10.1. Introduction to the redundancy.
5.2.10.2. Parallel installation and operating.
5.2.11. Communication port.
5.2.11.1. RS232 and USB ports.
5.2.12. Intelligent slot to insert the communication card.
5.2.13. Software.
5.2.14. Considerations before commissioning with the loads.
6. OPERATING.
6.1. COMMISSIONING.
6.1.1. Checking before commissioning.
6.2. START UP AND SHUTDOWN OF THE UPS.
6.2.1. UPS start up with AC mains present.
6.2.2. UPS start up with no AC mains (Cold start).
6.2.3. UPS shutdown with AC mains present.
6.2.4. UPS shutdown with no AC mains.
6.3. MANUAL BYPASS SWITCH (MAINTENANCE).
6.3.1. Shifting to maintenance bypass.
6.3.2. Shifting to normal mode.
6.4. PARALLEL SYSTEM OPERATING
6.5. HOW UPGRADE THE PARALLEL SYSTEM WITH A NEW UPS
OR DOWNGRADE TO SINGLE MODE.
6.6. HOW TO REPLACE A FAULTY UPS FROM THE PARALLEL
SYSTEM.