16
SALICRU
Fig. 8.
Rack-type mounting in a 19” cabinet.
5.1.5.5. Rack mounting in a 19” cabinet with backup extension
(battery module).
•
This section describes a device with one battery module.
For more battery modules, repeat the same procedure for
each of them.
•
To install a device and its battery module in a 19” rack
cabinet, proceed as follows (see Fig. 9):
Using the supplied screws, fix the two adapter angles
for use as handles on each side of the UpS, respecting
your hand. Repeat the same procedure for the battery
module.
To install each unit, UpS and battery module in a rack
cabinet, it is necessary to have internal lateral guides
for use as supports. Alternatively, and upon request,
we can supply universal slides for use as guides, for
installation by the user.
mount the guides at the required height, ensuring
correct tightening of the fixing screws and appropriate
fitting in the machining, according to each case.
place the device onto the guides and insert it all the
way to the back. proceed in the same way for the
battery module.
depending on the weight of each unit according to the
type of device and battery module, and/or whether it is
installed in the upper or lower part of the cabinet, it is
recommended that two people carry out the installation
operations.
Fix the UpS and the battery module to the cabinet frame
by means of the screws supplied with the respective
handles.
Fig. 9.
Rack-mounted model in a 19” cabinet with
backup extension (battery module).
5.1.5.6. vertical tower-type mounting with pdU.
4 to 10 kvA models are supplied as standard with a pdU
module, designed to be attached to the side of the device.
Fix it to the UpS using the plate supplied as a support as shown
Fig. 10.
Vertically mounted tower-type model with PDU.
5.1.5.7. Rack mounting in 19” cabinet with pdU.
Similar to the UpS, the pdU module has angles for use as
handles for mounting in a rack cabinet.
•
proceed as follows (see Fig. 11):
Using the supplied screws, fix the two adapter angles
for use as handles on each side of the pdU, respecting
your hand.
According to each case, perform the steps indicated in
To install the pdU in a rack cabinet, it is necessary to
have internal lateral guides for use as supports, just
like for the UpS and/or battery module. Follow the
guidelines described in section 5.1.5.4 or 5.1.5.5 for
everything related to the guides.
place the pdU onto the guides and insert it all the way
to the back.
Fix it to the cabinet frame using the screws supplied
with the handles.
