19
MAINTENANCE, WARRANTY AND SERVICE
SALICRU
6.2.1. 750 / 1000 VA models
1.
Unscrew and remove the front panel on both ends.
Fig. 37.
Front panel removal
2.
Disconnect the battery cable from the UPS and re-
move the battery retaining battery bracket.
Fig. 38.
Battery bracket removal
3.
Grasp the battery and pull it out from the front panel.
Fig. 39.
Battery removal
4.
Slide the new battery into UPS.
5.
Reconnect the battery cable and screw up the battery
retaining battery bracket.
6.
Close and reinstall the front panel.
6.2.2. 1500 / 2000 VA models
1.
Remove the battery case front panel by pulling on both
ends.
Fig. 40.
Front panel removal
2.
Disconnect the battery cable from the Battery module.
Fig. 41.
Battery cable disconnect
3.
Unscrew and remove the battery retaining battery
bracket.
Fig. 42.
Battery bracket removal
4.
Pull the battery out onto a flat area.
Fig. 43.
Battery removal
5.
Slide the new battery into Battery module.
6.
Reconnect the battery cable and screw up the battery
retaining bracket.
7.
Close and reinstall the front panel back to Battery
module.
