20
MAINTENANCE, WARRANTY AND SERVICE
6.2.3. 3000 VA model
1.
Remove the battery case front panel by pulling on both
ends.
Fig. 44.
Front panel removal
2.
Disconnect the battery cable from UPS.
3.
Unscrew the battery bracket from the Battery module.
Fig. 45.
Battery cable disconnect and battery bracket
removal
4.
Remove the battery bracket from EBM by pulling on
both ends.
Fig. 46.
EBM battery bracket removal
5.
Pull the battery out (from right side and the left side)
onto flat area.
Fig. 47.
Battery right side removal
Fig. 48.
Battery left side removal
6.
Slide the new batteries into Battery module.
7.
Reconnect the battery cable and screw up the battery
bracket.
8.
Close and reinstall the front panel back to Battery
module.
6.3. Warranty conditions
The limited warranty only applies to those products that you
acquire for commercial or industrial use in the normal devel-
opment of your business.
6.3.1. Covered product
SPS ADVANCE
UPS series.
6.3.2. Warranty terms
Our company guarantees this product against any parts
and/or labour defect for 12 months period from its com-
missioning by our personal staff or other specifically au-
thorised, or 18 months from its factory delivery, whichever
expires first. In case of failure of the product inside the war-
ranty period, repairs to our facilities at no cost, the faulty
part or parts. The transport expenses and packaging will
be borne to the user.
Guarantee for period time higher than 10 years, the avail-
ability of parts and spare parts, as hardware as software,
as well as a complete assistance regarding the reparations,
components replacement and software updating.
6.3.3. Out of the scope of supply
Our company is not forced by the warranty if it appreciates
that the defect in the product doesn’t exist or it was caused
by a wrong use, negligence, installation and/or inadequate
testing, tentative of repairing or not authorized modification,
or any other cause beyond the foreseen use, or by acci-
dent, fire, lightnings or other dangers. Neither it will cover, in
any case, compensations for damages or injuries.
6.4. Available maintenance and
service contracts
When the warranty is expired, has several maintenance
modalities:
• Preventive
. It guarantees a higher safety to preserve
the correct operating of the equipments with a yearly
preventive visit, in which the specialised technicians
make several tests and sets in the systems:
Check and write down the input and output voltages
and currents per phase.
Check the logged alarms.
Check the readings of the LCD panel.
Other measurements.
Check the fan status.
Check the load level.
Check the selected language.
Check the correct location of the equipment.
USER'S MANUAL
