background image

4

INTRODUCTION

 SALICRU

1.  Introduction

1.1.  Gratefulness letter

We would like to thank you in advance for the trust you have 
placed in us by purchasing this product. Read this instruc-
tion manual carefully before starting up the equipment and 
keep it for any possible future consult that can arise.
We remain at you entire disposal for any further information 
or any query you should wish to make.

 

Yours sincerely.

  

 

ˆ

The equipment here described can cause impor-

tant physical damages due to wrong handling. This 

is why, the installation, maintenance and/or fixing of 

the here described equipment must be done by our 

staff or specifically authorised.

 

ˆ

According to our policy of constant evolution, we re-

serve the right to modify the specifications in part or 

in whole without forewarning. 

 

ˆ

All reproduction or third party concession of this 

manual is prohibited without the previous written 

authorization of our firm.

1.2.  Using this manual

The target of this manual is to give explanations and pro-
cedures for the installation and operating of the equipment. 
This manual has to be read carefully before installing and 
operating it. Keep this manual for future consults.
This equipment has to be  

installed by qualified staff 

and, 

the simple help of this manual, 

it can usable by personnel 

without specific training

.

1.2.1.  Used conventions and symbols

«Warning» 

symbol. Carefully read the indicated 

paragraph and take the stated prevention meas-

ures.

«Danger of electrical discharge» 

symbol. Pay 

special attention to it, both in the indication on the 

equipment and in the paragraph referred to this user’s 
manual.

i

«Main protective earthing terminal» 

symbol. Con-

nect the earth cable coming from the installation to 

this terminal.

«Earth bonding terminal» 

symbol. Connect the earth 

cable from the loads or battery cabinet to this terminal.

i

«Notes of information»

 symbol. Additional topics 

that complement the basic procedures.

Preservation of the environment:

 The presence of 

this symbol in the product or in their associated doc-
umentation states that, when its useful life is expired, 

it will not be disposed together with the domestic residuals. 
In order to avoid possible damages to the environment, 
separate this product from other residuals and recycle it 
suitably. The users can contact with their provider or with 
the pertinent local authorities to be informed on how and 
where they can take the product to be recycled and/or dis-
posed correctly.

1.2.2.  For more information and/or help

For more information and/or help of the version of your spe-
cific unit, request it to our Service and Technical Support 
(

S.T.S.

).

1.2.3.  Safety and first aid

Together with the equipment and this «User and installa-
tion manual», it is provided the information regarding to 
«Safety instructions» (See document EK266*08). Before 
proceeding to the installation or commissioning, check that 

both information

 are available; otherwise request them. 

It is obligatory the compliance of the «Safety instructions», 
being the user the legal responsible regarding to its obser-
vance. Once read, keep them for future consults that can 
arise.

USER'S MANUAL

Summary of Contents for 750 VA

























Reviews: