background image

5

QUALITY AND STANDARD GUARANTEE

SALICRU

2.  Quality and standard 

guarantee

2.1.  Management declaration

Our target is the client’s satisfaction, therefore this Manage-
ment has decided to establish a Quality and Environmental 
policy, by means of installation a Quality and Environmental 
Management System that becomes us capable to comply 
the requirements demanded by the standard 

ISO 9001

 and 

ISO 14001

 and by our Clients and concerned parts too. 

Likewise, the enterprise Management is committed with the 
development and improvement of the Quality and Environ-
mental Management System, through:  

• 

The communication to all the company about the im-

portance of satisfaction both in the client’s requirements 

and in the legal and regulations 

• 

The Quality and Environmental Policy diffusion and the 

fixation of the Quality and Environment targets.  

• 

To carry out revisions by the Management. 

• 

To provide the needed resources. 

2.2.  Standard

The 

SPS ADVANCE

 product is designed, manufactured 

and commercialized in accordance with the standard 

EN 

ISO 9001

 of Quality Assurance. The   marking shows the 

conformity to the EEC Directive (quoted between brackets) 
by means of the application of the following standards: 

•  2006/95/EC

 of Safety of Low Voltage

•  2004/108/EC

 of Electromagnetic Compatibility (EMC).

• 

in accordance with the specifications of the harmonized 

standards. Standards of reference: 

• 

EN 60950-1:

 Equipment Information Technology. Secu-

rity.  Part 1: General requirements.

•  IEC/EN 62040-2

: Uninterruptible power supplies 

(UPS).        Part 2: Requirements for Electromagnetic 

Compatibility (EMC).

•  IEC/EN 62040-3

: Uninterruptible power supplies 

(UPS). Part 3: Methods of operation and specification 

of test requirements.

The declaration of conformity CE of the product is at the 
disposal of the client previous express request to our head 
offices.

2.3.  Environment.

Equipment recycling at the end of its useful life:

Our company commits to use the services of authorised 
societies and according to the regulations, in order to treat 
the recovered product at the end of its useful life (contact 
your distributor). 

Packing:

To recycle the packing, follow the legal regulations in force.

Batteries:

The batteries mean a serious danger for health and envi-
ronment. The disposal of them must be done in accordance 
with the standards in force.

Summary of Contents for 750 VA

























Reviews: