background image

6

DESCRIPTION

3.  Description

This series is a compact and fully pure sinewave line inter-
active UPS, and it designs for application and environment, 
such as desktops, servers, workstations, and other net-
working equipments. This model is available in the output 
ratings of 750, 1000, 1500, 2000, and 3000VA. This se-
ries protects your sensitive electronic equipments against 
power problems including power sags, spike, brownouts, 
line noise, and blackouts.
This series designs from two-in-one form factor; it can be 
placed either in Rack 2U or Tower. The front panel of the 
UPS includes LED indicators and four push buttons (Power 
Switch, UPS Test/Silence, Configure, and Enter) that allow 
to monitor easily, configuration and control, AC line-in, noti-
fication of site wiring fault and output load status of the UPS. 
It also includes four LCD bar graphic (Load/Battery Level 
Indication); two status indications (On AC, On Battery); five 
alarm indications (Overload, Over Temperature, Site Wiring 
Fault, Battery Fault, Self Test Failure). A push button from 
the front panel allows silencing of the AC fail alarm and the 
initiation of the UPS self test sequence as well. The UPS 
case for 750 ~ 2000VA is made of plastic as well as 3000VA 
is made of metal.
This series is powered from the AC mains and supply AC 
outputs via receptacles on the rear panel. Communication 
and control to the unit is available through serial or USB 
ports located on the rear panel. The serial port will sup-
port communications directly with a server. The communi-
cations protocol for the serial ports shall conform to true 
RS232 interface.. 

•   Features: 

 

ˆ

Microprocessor control guarantees high reliability.

 

ˆ

High frequency design.

 

ˆ

Built-in boost and buck AVR.

 

ˆ

User replaceable design for 1500VA or above.

 

ˆ

Selectable output range and line sensitive.

 

ˆ

Cold startup capability.

 

ˆ

Optocouplers/RS-232/USB communication port.

 

ˆ

SNMP allows for web-based remote or monitoring 

management.

 

ˆ

Enable to extend runtime with scalable external bat-

tery pack for 1500VA or above.

 

ˆ

Overload, Short-circuit, and overheat protection.

 

ˆ

Rack/Tower 2 in 1 Design.

 

ˆ

19” rack mount available for all models.

USER'S MANUAL

Summary of Contents for 750 VA

























Reviews: