Salicru EQUINOX BATT EQX2 BATT, User Manual

25

EN

3.  SAFETY INFORMATION.

3.1.  USING THIS MANUAL.

•

This user manual applies to the units described on the cover 

and intends to be a guide that describes the installation and 

start-up instructions under safe conditions and in accordance 

with the standards. Please read the entire manual before car-

rying out any action, procedure or operation with the unit, 

especially before applying voltage to the input, respecting the 

actions in the order shown in this manual.

•

Compliance with the "Safety instructions" is man-

datory; therefore, the user will be legally respon-

sible 

for observing and applying them at all times.

•

If you do not fully or partially understand the in-

structions, especially those relating to safety, 

you should not proceed to install or commission the equip-

ment, as this may pose a

 risk to your safety or that of other 

people, 

possibly causing

 serious injury or even death, 

in addition to causing 

damage to the equipment and/or to 

the loads and installation

.

•

Local electrical regulations and different restrictions 

at the customer's location may invalidate some rec-

ommendations contained in the manuals. Where discrepan-

cies exist, the relevant local regulations must be followed.

•

All units are supplied with the corresponding labels to ensure 

that each part is properly identified. In addition, the user can 

refer to the user manual at any time during installation or 

start-up, which provides clear, well-organised and easy-to-

understand information.

•

Finally, once the unit is installed and in operation, we recom-

mend that you keep the documentation in a safe place that is 

easy to access, in case of any future queries that may arise.

The following terms are used interchangeably in the document to 

refer to:

•

«EQX2 BATT, or battery»

.- Battery for Equinox 2 photovol-

taic inverter.

•

"

T.S.S.

".- Technical Service and Support.

•

"

Customer, installer, operator or user

".- They are used 

interchangeably and, by extension, to refer to the installer and/

or the operator who will carry out the corresponding actions, 

whereby the responsibility for carrying out the respective 

actions may be held by the same person when they act on 

behalf or in representation of the installer or operator.

3.2.  NOTES ON SAFETY.

1. 

Before installation, read this manual carefully and strictly 

follow its instructions.

2. 

Installers must receive professional training or obtain certifi-

cates of professional qualification related to electricity.

3. 

Do not open the batteries during installation. In addition to 

carrying out work on the wiring terminal (as indicated in this 

manual), touching or changing components without authori-

sation may cause personal injury, damage to the inverters, 

and void the warranty.

4. 

All electrical installations must comply with local electrical 

safety regulations.

5. 

If the battery requires maintenance, please contact the des-

ignated technical personnel for installation and maintenance. 

6. 

To use this battery together with an inverter that is connected 

to the grid to generate power, permission from the local power 

supply authority is required.

7. 

The temperature of some parts of the battery may 

exceed 50°C during operation. To avoid burns, do not 

touch it during operation. Let it cool down before doing so.

8. 

When exposed to sunlight, the solar field generates 

a dangerously high DC voltage. Operate in accordance 

with the instructions in manual,

 danger of death

 .

3.3.  CONVENTIONS AND SYMBOLS USED.

The table below shows the symbols that may appear in this manual 

and their definition:

Danger

Hazardous situation which, if not avoided, could result in death 

or serious injury to personnel.

Warning

Potentially hazardous situation which, if not avoided, could 

result in death or serious injury to personnel.

Caution

Potentially hazardous situation which, if not avoided, could 

result in minor or moderate injury to personnel.

Attention

Safety warning information about the equipment or the 

environment, to prevent damage to the equipment, data loss, 

degradation of performance or other unpredictable results.

Note

This symbol highlights important information, best practices 

and tips, etc.

Tab. 1.  Symbols used in this manual.

EQX2

 SOLAR INVERTERS CONNECTED TO THE GRID

USER MANUAL