49
d.
Interface of S-Code option
Fig. 75.
Interfaces of Module submenu.
Details of power module submenu:
Submenu name
Content
Meaning
Input
V
Input phase voltage of selected module
A
Input phase current of selected module
Hz
Input frequency of selected module
PF
Input power factor of selected module
Output
V
Output phase voltage of selected module
A
Output phase current of selected module
Hz
Output frequency of selected module
PF
Output power factor of selected module
Loads
V
Load voltage of selected module
%
Load (percentage of power module
selected)
kW
Pout: Active power
kVA
Sout: Apparent power
Information
BATT+(V)
Battery voltage (positive)
BATT-(V)
Battery voltage (negative)
BUS(V)
Bus voltage (positive and negative)
Charger(V)
Charger voltage (positive and negative)
Fan time
Fan operating time of power module
selected
Inlet
temperature
(°C)
Inlet temperature of power module
selected
Outlet
temperature
(°C)
Outlet temperature of power module
selected
Code-S
Failure code
For maintenance personnel
Tab. 26.
Description of each Module submenu.
7.3.3. Settings.
Press icon
at the bottom of the screen to access the
Settings menu.
Submenus appear on the right side of the screen. Users can
enter each Settings interface by pressing on the corresponding
icon.
7.3.3.1. Date & Time setting.
The user can select the date format and set the date and time.
The interface is shown below:
Settings interface
Submenu
Fig. 76.
Settings submenu: Date & Time.
7.3.3.2. Language setting.
The user can select the language. The interface is shown below:
Fig. 77.
Settings submenu: Language.
7.3.3.3. Communications protocol setting.
The UPS supplies communication ports RS-232 and RS-485, as
well as an optional user configurable SNMP card.
If the RS-232 port is used, the MODBUS protocol must be
selected. If the RS-485 port or SNMP card is used, the ‘SNT’
option must be selected.
This settings screen is shown in the following Fig. 78:
SLC ADAPT
UNINTERRUPTIBLE POWER SUPPLY (UPS)
USER'S MANUAL
Summary of Contents for SLC ADAPT Series
Page 1: ...SLC serie ADAPT 180 300 y 500 kVA UNINTERRUPTIBLE POWER SUPPLY UPS USER S MANUAL...
Page 12: ...12 SALICRU Fig 8 Front view of 10 slot cabinet 500 kVA 300 kVA at 3x208 V with closed doors...
Page 64: ...64 SALICRU...
Page 65: ...65 SLC ADAPT UNINTERRUPTIBLE POWER SUPPLY UPS USER S MANUAL...