background image

4

SALICRU

 SALICRU

1.  INTRODUCTION.

1.1.  THANK-YOU LETTER.

We thank you in advance for the trust placed in us in the pur-

chasing of this product. Read this instruction manual carefully 

in order to familiarize yourself with its content, since the more 

you know and understand the equipment the greater your sat-

isfaction, level of safety and optimization of its functionalities 

will be.

We remain at your disposal for any additional information or 

queries that you may wish to make.

 

Yours sincerely.

 

The equipment described herein 

is capable of causing 

significant physical damage in the event of improper 

handling

. For this reason its installation, maintenance 

and/or repair must be carried out exclusively by our per-

sonnel or by 

qualified personnel

.

 

Although no effort has been spared to ensure that the in-

formation in this user manual is complete and accurate, we 

are not responsible for any errors or omissions that may 

exist.

The images included in this document are for illustrative 

purposes and may not represent exactly the parts of the 

equipment shown, therefore they are not contractual. How-

ever, any divergence that may arise will be remedied or 

solved with the correct labelling on the unit.

 

Following our policy of constant evolution, 

we reserve 

the right to modify the characteristics, operations 

or actions described in this document without prior 

notice

.

Consequently, the contents of this manual may differ from 

the latest version available on our website. Check that you 

have the latest version of the document (listed on the back 

cover, on the logo of our brand) and download it from the 

website.

 

Reproduction, copying, assignment to third parties, 

modification or total or partial translation

 of this 

manual or document, in any form or by any means, 

without 

previous written authorization by our firm is prohib-

ited

, with the full and exclusive property rights over the 

same being reserved by our firm.

Summary of Contents for SLC ADAPT X Series





























































Reviews: