28
SALICRU
Once the period of time has elapsed, connect the bat-
teries to the unit and the unit to the mains, following
the safety and connection instructions.
Proceed with the start-up. See chapter
Leave it in this mode for at least 12 hours.
Once the batteries have been charged, stop the unit,
disconnect it electrically and store the UPS and the bat-
teries in their original packaging, noting the new date
of recharge of the batteries in the box on the label (see
The units that form part of a parallel system will be
treated as individual units for charging the batteries,
and therefore no additional connection is necessary.
5.1.3. Unpacking.
•
The unit's packaging consists of a wooden pallet, cardboard
or wooden packaging, as applicable, expanded polystyrene
(EPS) or polyethylene foam (EPE) corner protectors, polyeth-
ylene cover and strips, all recyclable materials, so if you do
dispose of them, you should do so in accordance with current
laws. We recommend that you keep the packaging in case
you need to use it in the future.
5.1.3.1. 30-40 kVA equipments.
In
are shown, by way of example, the illustra-
tions corresponding to the unpacking of the UPS cabinet from
30 kVA to 40 kVA.
1
Fig. 22.
Removing the cardboard packaging.
2
Fig. 23.
Removal of the corner pieces and plastic cover.
3
Fig. 24.
Extraction of the guides to facilitate the descent
of the equipment from its pallet.
4
Fig. 25.
Mounting the guides on the pallet.
